This Post May Contain Affiliate Links. Please Read Our Disclosure Policy.
Tuesday, August 20, 2013

HOW WE MADE THE KITCHEN LANTERN PENDANTS WORK



I've always wanted some additional statement lighting in our kitchen, but with the way our current lighting was configured it just wasn't going to work.  Today I'm sharing how we went about working around that and installing the new lights.  This turned in to quite a lengthy post, but I wanted to show our process in case anyone else has a similar problem.
  


We had great lighting, but our ceiling looked like swiss cheese...there were lots and lots of recessed can lights (22 altogether in our open kitchen/living/dining!).  The biggest problem in adding lighting over the island was that none of the current lighting was centered.  It was centered for the room as a whole, but the island is off center and none of the can lights were where they needed to be.  So, we knew that if we bit this project off it would not be quick and easy.  


Thankfully, my soon-to-be-brother-in-law knows a thing or two about electrical work, and agreed to help us out.  We decided to remove the entire center row of can lights in order to install the pendants there.  However, this left the lights on the other two sides unbalanced, so we moved two of them over allowing both sides of cans to be an equal distance from the pendants in the center.  

I got everything measured and marked. To determine the exact position of the new lights, I made a mark with painters tape on the island right below where I wanted the lights to be.  Then, I cut a long string, tied a pen to the end of it, and attached the other end with a thumbtack to the ceiling.  I kept adjusting the thumbtack slightly until the pen on the bottom hung exactly over the mark on the island.  Then, we had our spot for the new lights!  I also measured and marked where the lights on the right side needed to go, and the lights with the green tape are the ones we removed.   



In the mean time Ray and Micah worked together in the attic to pull the old lights out, move the 2 cans over, put in ceiling patches where needed, and install the wiring and ceiling braces for the new pendants.  I wish I could give you a how-to on that, but I didn't even try to figure out what they were doing!  Micah even installed a completely new dimmer switch for the lanterns, so they could operate separately from the can lights.




On a side note, while the boys were working my sister and I were doing fun stuff...like make-up shopping and framing artwork for her bedroom.

After a long afternoon of work, Micah left us with 2 recessed lights in a new spot, 2 places wired and ready to install the new pendants, and lots of ceiling holes to finish patching.  He did the hard part, the rest we could handle.




To repair the seams left around the patches that Micah put in, I filled the edges with spackling paste, let it dry and lightly sanded.  Then I used some texturing compound and feathered around the seams to try to blend eveything in, and hand sanded when it dried.  



After painting, it looked terrible!  The patched spots were very obvious!  I decided that I hadn't sanded nearly enough, and knew it was going to take more than sanding by hand.  So, I taped plastic around the area as much as I could, plugged in my palm sander, and got after it.  Yes, it was messy and dust still got everywhere, but it had to be done! 



It worked!  Everything was nice and smooth and the filled patches were undetectable.  Even without any additional texturing, everything  blended right in.  Now, unless you stare really hard and the lighting is just right, you can't tell where the old lights were.  



With the lighting from this angle you can see the places that were repaired, but I'm sure that's a paint issue more than anything, and someday when we get around to repainting the entire ceiling everything will be completely undetectable. (Years ago when we painted the ceiling, we used a Satin finish.  I've since learned that is a big no-no on ceilings...if it had been flat paint I'm sure none of these spots would have showed.)





Once the ceiling repair work was done, Ray was able to easily install the lights.  First, we hung the light cage up without the glass, just to make sure the height was right.  Those are heavy...it helped not to have the glass in until the last minute.





Now, because I don't want to lead anyone astray, I have one problem to share with you that I didn't think about before putting these lights up.  With our cooktop being out in the open on the island, we don't have any kind of vent for the stove.  SO... after cooking for a few weeks with the lights up I noticed some splatters and residue on the glass.  I don't want to be cleaning these lights all the time.  Honestly it's a little tricky to clean the glass on the inside-it's a tight squeeze to get in there and I don't want to be rocking the light around a lot.  I came up with a little solution that's not the prettiest, but it helps.  When I'm cooking something particularly messy, like frying something, I stretch a shower cap over the bottom of the light!  


Yeah, I know, SUPER classy...but it works!  Some particles still get on the outside of the glass, but I don't mind cleaning that part as much.  Even with that problem, I still think it's totally worth it to have the lights there.

One more tid-bit in the lighting saga, remember I bought these at the Habitat for Humanity ReStore last year.  They were brand new in a sealed box, so it never crossed my mind to open it up and check them out.  Well, sure enough, one of the panes of glass was cracked when I opened the box, and the store wouldn't do anything about it.  These panes are beveled, so to replace one would have cost me about $40.  Crazy...I only paid $50 for the whole light!  Needless to say, I decided to go with a regular piece of glass for that one pane, for about $10, and turned that side to the back.  I really don't think anyone would ever even notice, so we'll just let that be our little secret, o.k.?  :)


So, I guess the moral of this story is don't let a little something like lights being in the wrong place stop you from doing something you really want to do! (And kudos to you if you actually read this novel of a post!)

   

Would you like to comment?

  1. Jennifer, those look so good! That was a lot of work especially patching the ceiling. It was worth it and no one is ever going to notice the painting up there. Only you will know...unless you point it out. Which is the goofy kind of thing I would do. :)

    ReplyDelete
  2. So much better! Love your swiss cheese comment! Our kitchen overhead lights are those eyeball ones and I feel like big brother is watching us! Can't wait to change those out!! xo Kristin

    ReplyDelete
  3. they look amazing and were worth all that effort! i am suddenly craving swiss cheese.

    ReplyDelete
  4. Your new lanterns are beautiful, they make your kitchen look very stylish and classy!

    ReplyDelete
  5. Yay I get kudos...because I did read the whole post. :) Of course, that's because I am super impressed at the entire project. Looks beautiful and perfect, even if it's not completely. ;) Gotta love a man who will let you install non-easy lighting. My hub is very handy around the house (just fixed a main water line leak, to prove it!) and usually willing to let me do whatever I want in the house, but that definitely took some doing. Glad you had help AND got some girl time in. Lol.

    The lights look amazing and I think you might start a new trend with the shower caps. That's too funny. Whatever works, right? :)

    ReplyDelete
  6. Great job! Micah is very talented to be able to do all that electrical work and the lanterns are beautiful. I especially love the shower cap touch ~ a whole new image in styling kitchens! :)

    xo
    Pat

    ReplyDelete
  7. Wow - that was a big project, Jennifer! How nice to have an electrician in the family, and that both you and Ray can handle these kinds of extensive DIYs. I have a big hole in my kitchen ceiling where I moved a light; it's been there for 2 years! Time to do something about it. Your kitchen lighting turned out SO beautifully - I love those lanterns!!!

    ReplyDelete
  8. Wow, I had no idea you went to that much work, it was definitely worth all your trouble! The splatters are certainly something to consider that I wouldn't have thought of...love the shower cap! :)

    ReplyDelete
  9. So lucky that you have an electrical guru in your family or soon to be in your family! I get totally overwhelmed with any electrical work...I stay far far away from it! It looks so much better than your swiss cheese ceiling! lol! You are hilarious! ;)

    ReplyDelete
  10. I found your blog in the latest Ladies' Home Journal....I've also added your name to my list of blogs I follow. You have some wonderful ideas....I will be trying the "mirror project" from the magazine...thanks

    ReplyDelete
  11. It looks like they were definitely worth the effort! I've always said it would be nice to have an electrician in the family :)

    ReplyDelete
  12. I did read the entire post LOL. Love that you got to place the lights where you wanted and the shower cap is genius. In the end I really think and agree that it was worth it.

    ReplyDelete
  13. Your lights are GORGEOUS and I love your great idea to use the shower cap!! That's so sweet that Micah was able to help out too :) Can't wait for the wedding!!
    ~Karen

    ReplyDelete
  14. I have the EXACT same issue in our open kitchen/dining room. We have lots of recessed lights, but none of them are centered over either the island or the dining area so Ive been really hesitant to install pendants and a chandelier like I really want to. Thank you so much for this post.

    ReplyDelete
  15. Jennifer,

    I have lights like this that are bright gold and I want to spay pain them oil brushed bronze as well. How did you take the class out and spray the inside of the light? That is my hold up on the project currently. Thank you

    ReplyDelete

Thanks so much for leaving a comment, they make my day! If you have a specific question, please make sure to check back here as I will respond in the thread, or leave your e-mail so that I can respond personally. Or, email me directly to address in "Contact" section at top.