This Post May Contain Affiliate Links. Please Read Our Disclosure Policy.
Tuesday, April 3, 2012

DIY Drum Shade {Tutorial}



Thank you for all of your kind comments on my dark ceiling!  Yesterday I gave you a sneak peek of my new drum shade, and today I'll show you how I did it.


About 7-8 years ago I purchased this vintage chandelier at a thrift store.  It was a little more pricey than I would normally pay, but all of the crystals were there and I knew this wasn't something I would come across often, so I snatched it up.  In our old house it hung in our kitchen eating area, and when we moved to our current home I hung it in the office to add a bit of glam.  I always felt like it was a little small for the space, but loved it too much to replace it.  

A few weeks ago, after seeing a few photos on Pinterest, inspiration struck!  I didn't even try to find a pre-made drum shade that would fit my chandy.  I still wanted to be able to see the fixture, but wanted to bulk it up a bit.  

I have a ton of pictures today, so I'll get on with it!

Supplies: 
 (2) 23" embroidery hoops-I only used the interior solid rim from each one
18 gauge wire
gold tulle (2-3 yards)
Not pictured: 
wooden skewers
gold trim ribbon
clothespins & hot glue gun (2 of my staple supplies for projects!)


I tightly wrapped the ends of each wire on 4 somewhat even sections of the hoop...just eyeballed it.


After looking at my chandelier, I determined that I wanted the height of the shade to be 10 inches, so while holding the top hoop at the right mark, I wired it together with the bottom hoop.



I thought that the wire would be enough support, and it did hold really well from top to bottom, but the hoops shifted too easily from side to side.  So, I clipped some wooden skewers to size and hot glued them in place near the wires.


I wanted to make sure that the glue would hold the skewers in place well, so I left the wire on and sprayed the entire thing gold.


Everything was holding up very nicely, so I clipped off the wires between the hoops, just leaving the skewers for support.  I wired 4 more pieces to the top hoop, planning to use them to secure the shade to the light.  And the frame was done!


Then, I started working to cover it.  I bought 5 yards of fabric not exactly sure how I was going to cover it, but here's what I came up with.  The tulle comes already folded in half lengthwise, and I left it that way.  Then, I folded about a 1/2" towards the inside of the top hoop, and wrapped the tulle lengthwise around the outside.  That still left a lot of fabric width at the bottom, which I pulled up through the middle inside and clipped to the top rim.  A little hard to explain, but basically I wrapped it so there were 4 thicknesses of the fabric around the shade, a double width on the outside wrapped with a double width on the inside.  Clear as mud??? 


After trimming the excess yardage, I worked to pull from the top and tighten everything up.  When it looked o.k., I clipped the top edge to hold everything in place.


Next, on the inside top rim, I used hot glue along the edge.  It soaked through all of the layers of tulle and when it cooled off all of the fabric was stuck in place and secure.  After removing the clothes pins I went back and glued those sections as well.  (What, you don't name your clothespins???  ;)  Back in my teaching days I used wooden clothespins each year for the lunch count and helper charts, and just kept them all to use at home after the year was over.  It's fun to look back at the names and remember the children.  I taught 3rd grade and most of my students are probably out of college now!)


After the glue dried I carefully trimmed the excess off of the top.


This is the seam.  The starting point is underneath and when I got to the end, I just folded it under and glued the top like the rest.  I tried to place it right at the skewer so it wouldn't be as noticeable.  It's not perfect, but that's o.k.  I hung that part in the back.


Rather than cutting a slit around the wire, I just left the fabric and pulled it a little tighter.  You can't really see it anyway once the shade was hung.


However, you COULD see the hot glue, so I used some gold ribbon trim to cover it.  I went around the inside top and bottom edges and I think it helped to give a finished look.



O.K.!  The shade was done and the moment of truth had come...figuring out if I was going to be able to hang it.  My plan was to just rig it with those 4 wires.  It weighs next to nothing, so that wasn't an issue.  Here's the top view.  The wires really aren't visible from ground level unless you stand really far back and look really hard.  I think it was beneficial to hang it this way, because I could adjust each wire as needed to get the shade to hang straight. (Which was probably the hardest part of the entire project!)


And there you go!


Here's the view from underneath.  Nothing touches the shade, so we should be all nice and safe. 


I love it!  The scale is just right for the room now and it feels updated although I can still see the pretty fixture and crystals underneath.


It gives off a really pretty glow at night, too!


Oh, and I almost forgot the best part.  I used coupons for the hoops at Hobby Lobby, and the tulle and ribbon were on sale.  So, the cost for this project was about $14!

You can see my Pinterest board here where I pinned some photos that gave me the idea for this project, and you can click on the button on my sidebar if you would like to follow me on Pinterest.  

Would you like to comment?

  1. FABULOUS! This is amazing, Jennifer! Your directions are so very clear and your photos are great. I can tell you have to be the holder AND photographer of projects like I do...cute shoes! You are right, thise REALLY updates your chandy but it is still visible. I am "pinning" this right now. This may be your most popular post yet.

    ReplyDelete
  2. Absolutely stunning! I'm in awe. It's gorgeous! I'm featuring this on my FB page today!!

    ReplyDelete
  3. You did not disappoint! I am so going to try this somewhere (thinking master bedroom), I just need a cute chandy now! AWESOME JOB!!!!

    ReplyDelete
  4. Totally fabulous idea to give your beautiful chandy some size! I love it against the ceiling color! You win the diy award for creativity!

    ReplyDelete
  5. Stunning! I have no idea how you thought this up but it's the best. I especially like it because you can see the chandy and I love bling! :-)

    Great look against the ceiling ~ just perfect.
    xo
    Pat

    ReplyDelete
  6. You. Are. Amazing.

    Absolutely gorgeous!!!! Beautifully sophisticated and modern at the same time...which makes it perfect. :)

    ReplyDelete
  7. You did an amazing job; I am inspired! Thank you for sharing. I have been considering using the embroidery hoops for my daughter's chandelier but I am not quite there yet. Working on a different idea with it right now. Love the gold against the dark ceiling.

    ReplyDelete
  8. Stunning! You took a glam fixture and upped the glam factor. Love the tutorial too ... Now I'm looking around the house for a light fixture to encase in a custom made drum shade ...

    :)

    Linda

    ReplyDelete
    Replies
    1. Congrats on your feature at The Shabby Nest tonight! So well-deserved ...

      :)

      Linda

      Delete
  9. I absolutely LOVE this project! I'm a big fan of tulle, and it works so great as a shade!! You did a great job! I have used to have names on clothespins, too (former K teacher)...lol Excited to find you at shabby nest party!

    ReplyDelete
  10. Love it! So smart! I might give this a shot. Thanks for sharing! xoxo

    ReplyDelete
  11. Amazing, I love the entire project. Very clever. With the light on it just shines!

    ReplyDelete
  12. Wow! What a labor of love and it totally paid off. It's just gorgeous. I'm new to your blog; found you via your link-up on Simply Klassic Home. At the risk of being redundant, I love your dark ceiling. This fixture must just look gorgeous all lit up at night.

    Looking forward to sifting through your blog. I'll be following along for sure.

    Happy Easter!

    ReplyDelete
  13. Clever idea and a good tutorial too. Thank you! I've posted this to Pinterest.

    ReplyDelete
  14. This is very clever and turned out beautifully! Great tutorial too. I love the sheerness of the fabric.

    ReplyDelete
  15. Are you serious!!!! WOW!!! I am completely amazed by this. My grandmother has a chandelier just like that..... Who knew it could turn out so fabulous. Love it!!

    Visiting from the TT&J link up

    http://seesewandseedlings.blogspot.com/

    ReplyDelete
  16. Very nice and clever too! I love the glow at night, beautiful!

    ReplyDelete
  17. I bought one like this last year, was looking forever for one that caught my eye. If I had idea this could have been done I would have saved over $100!!!!

    ReplyDelete
  18. I'm visiting from the Shabby Nest. This is brilliant! Genius! I am so going to do this with a light fixture in my bedroom. Thanks for the inspiration. Great blog!

    ReplyDelete
  19. Fantastical!!! You have inspired!! Thanks so much for sharing and cuh..ute flip flops!!
    Maureen

    ReplyDelete
  20. This is amazing!!! I've been looking for larger drum shades to place around a few of my chandeliers, but this DIY version is genius! I'm going to have to try this! Pinning right now.

    ReplyDelete
  21. I love this! I had a smaller version of this same chandelier in my office that my husband took down yesterday. I planned on putting it in the master bedroom but it seemed a little too small. Now I know what to do about it! It will match perfectly in that room since it is all neutrals with the walls painted Old Gold by Laura Ashley. I'm so excited......Thanks for sharing!

    ReplyDelete
  22. Terrific tutorial and great job!!!! Your chandelier is beautiful BTW. Thanks for sharing the information.

    On the same note, for those who might wish to do similar I hope you don't mind me suggesting that if using a sheer fabric, they might consider using a little Rub 'n Buff on the embroidery hoops prior to construction in order to co-ordinate with the finish of their fixture.
    -Brenda-
    Footnote: Rub 'n Buff comes in a small tube and a variety of colour finishes. It is easily applied and can be purchased at most Craft Stores.

    ReplyDelete
    Replies
    1. Thank you Brenda! I used spray paint on my hoops but Rub n Buff would work well also.

      Delete
  23. I'm so happy to have come across this project as I was scanning Google Images! I was disparing of replacing a chandelier I no longer loved, but then came upon the idea of adding a drum shade. More dispair . . . Most of the lovely ones cost well over $100! Your beautiful shade has inspired me to go in this direction; I'm even thinking of using bias-cut silk or taffeta, though that will be even more challenging. At these costs, I can afford to experiment! Thank you SO much!

    ReplyDelete
  24. I love this!! I did a version of it in my kitchen and other than it being a tiny bit crooked from time to time I am pleased. Yours is beautiful!

    ReplyDelete
  25. Lovely! Spectacular! Genius idea - I want to attempt your tutorial with a floor lamp chandelier to get a Restoration Hardware feel. I will let you know if it works! Brilliant (I know I am a year late in commenting :)
    Thank you!
    Debbie, http://ordinary-creative.com

    ReplyDelete
  26. About 7-8 years ago I purchased this vintage chandelier at a thrift store. ... ccrystalshade.blogspot.com

    ReplyDelete

Thanks so much for leaving a comment, they make my day! If you have a specific question, please make sure to check back here as I will respond in the thread, or leave your e-mail so that I can respond personally. Or, email me directly to address in "Contact" section at top.